The boat is now complete and collection booked for two weeks time.
This shot shows the finished interior with a couple of changes from the standard specification. Firstly the upholstery is not standard and the cushions are 5 inches thick rather than the standard 3 inches. This was a tip from Mike Brooke and I think we will all appreciate the additional comfort when on board. The lighting would usually be 4 strips of LEDs, but I prefer more traditional lights, so there are 4 individual lamps – still LED’s plus a bulkhead light over the forward bunk.
The buttoned roll is to create an edge to the bunk.
You can just see the edge of the flexteek which is on the cabin floor.
Advertisements